Through-Hole Low Temp P/B Switch 3FTL6
Multimec 3F series has an actuator extending from the switch body and uses a slide-on cap retention system. In addition, it has a right angle version also with an LED.

Specifications:

•through-hole
•50mA/24VDC
•single pole
•momentary
•10.000.000 operations lifetime
•sealed to IP67
•3.5N actuation force
•quiet version also available
•temperature range: -40/+115ºC
•through-hole right angle version
Multimec 3F series can be provided with an LED: LED colours: blue, green, yellow, white, red, green/yellow, red/green and red/yellow.

Caps available: 1N, 1WA/1WD/1WP, 1GA/1GC, 1X and Aquamec.

Through-Hole Low Temp tactile P/B Switch for variable height Actuators 3ETL9
Multimec 3E series switches have a hole in the switch body for mounting the actuators, giving overall height options from 8.0 - 15.0mm.

Specifications:

•through-hole
•50mA/24VDC
•single pole
•momentary
•10.000.000 operations lifetime
•sealed to IP67
•3.5N actuation force
•temperature range: -40/+115ºC
•through-hole right angle version

Through-Hole Low Temp P/B Switch with a level Actuator
Multimec 3A is for caps with hinges in order to imitate rocker-function switches. Due to the type of cap the travel of the 3A switch is 2 mm. There is also an illumination option with LED mounted on the switch.

Specifications:

•through-hole
•50mA/24VDC
•single pole
•momentary
•10.000.000 operations lifetime
•sealed to IP67
•3.5N actuation force
•quiet version also available to special order
•temperature range: -40/+115ºC
•through-hole right angle version

Multimec 3A series can supplied with an LED. LED colours: blue, green, yellow and red.

Multimec 3A series has an actuator level with the switch body.

Possible caps: 1A/1H/1M/1ZA; 1B/1C+2C/2D; 1ZB

NOTE: By 2014, the 3A series will be phased out in favour of the 5G series

See data below for the 5G series.

Through-Hole High Temp Tactile P/B Switch 3CTH9
Simplicity and reliability makes the multimec 3C an excellent switch for build-in and over-moulded solutions. In addition the switch is great for foil overlay as it can still function even if the overlay breaks and an upgrade can be done by changing the foil and not the PCB, which is very cost-effective.

Specifications:

•through-hole
•50mA/24VDC
•single pole
•momentary
•10.000.000 operations lifetime
•sealed to IP67
•3.5N actuation force
•temperature range: -40/+160ºC

Multimec 3C series has the actuator extending slightly from the switch body.

Through-Hole High Temp P/B Switch 3FTH9
Multimec 3F series has an actuator extending out from the switch body and uses a slide-on cap retention system.

Specifications:

•through-hole
•50mA/24VDC
•single pole
•momentary
•10.000.000 operations lifetime
•sealed to IP67
•3.5N actuation force
•temperature range: -40/+160ºC

Caps available, 1N, 1GA/1GC, 1WA/1WD/1WP, 1X and Aquamec.

Through-Hole High Temp Tactile Switch for variable height actuator 3ETH9
3E switch is a switch where the actuator is mounted into the hole in the switch body.

Specifications:

•through-hole
•50mA/24VDC
•single pole
•momentary
•10.000.000 operations lifetime
•sealed to IP67
•3.5N actuation force
•temperature range: -40/+160ºC

Multimec 3E series switches have a hole in the switch body for mounting the actuators, giving overall height options from 8.0 - 15.0mm.

Through-Hole High Temp P/B Switch with level actuator 3ATH9
Multimec 3A is for caps with hinges in order to imitate rocker-function switches. Due to the type of cap, the travel of the 3A switch is 2 mm. There is also an illumination option with LED mounted on the switch.

Specifications:

•through-hole
•50mA/24VDC
•single pole
•momentary
•10.000.000 operations lifetime
•sealed to IP67
•3.5N actuation force
•temperature range: -40/+160ºC
Multimec 3A series can supplied with an LED. LED colours: blue, green, yellow and red.

Multimec 3A series has an actuator level with the switch body.

Possible caps: 1A/1H/1M/1ZA; 1B/1C+2C/2D; 1ZB

NOTE: By 2014, the 3A series will be phased out in favour of the 5G series
See data below for the 5G series.

SMT High Temp P/B Tactile Switch 3CSH9
Simplicity and reliability makes the multimec 3C an excellent switch for build-in and over-moulded solutions. In addition the switch is great for use under a foil overlay as it can still function even if the overlay breaks and an upgrade can be done by changing the foil and not the PCB, which is very cost-effective.

Specifications:

•surface mount
•50mA/24VDC
•single pole
•momentary
•10.000.000 operations lifetime
•sealed to IP67
•3.5N actuation force
•temperature range: -40/+160ºC

Multimec 3C series has the actuator slightly extended from the switch body.

SMT High Temp P/B Switch for variable height caps 3ESH9
3E switch is a switch where the actuator is mounted into the hole in the switch body.

Specifications:

•surface mount
•50mA/24VDC
•single pole
•momentary
•10.000.000 operations lifetime
•sealed to IP67
•3.5N actuation force
•temperature range: -40/+160ºC

Multimec 3E series switches have a hole in the switch body for actuators giving overall heights of 8.0-15.0mm.

SMT High Temp P/B Switch with level actuator 3ASH9
Multimec 3A is for caps with hinges in order to imitate rocker-function switches. Due to this type of cap, the travel of the 3A switch is 2 mm. There is also an illumination option with LED mounted on the switch.

Specifications:

•surface mount
•50mA/24VDC
•single pole
•momentary
•10.000.000 operations lifetime
•sealed to IP67
•3.5N actuation force
•temperature range: -40/+160ºC

Multimec 3A series has an actuator levelled with the switch body.
Possible caps: 1A/1H/1M/1ZA; 1B/1C+2C/2D; 1ZB

NOTE: By 2013, the 3A series will be phased out in favour of the 5G series
See data below for the 5G series.