Elbag DIN Rail Mounting Interface Modules
Elbag european made Euro DIN rail mounting modules to accept from 68mm to 108mm x 1.5mm thick circuit boards.

These modular extruded profiles are made as standard in green, grey or black coloured UL94-V0 Polyamide, and the optional covers, in clear or coloured, are made from Polycarbonate.

Elbag DIN Rail Modular Enclosures, Vertical
Din Rail Mounting Enclosures 1 or 2 vertical PCB's, to house connectors, faston or detachable terminal strips.

There's an option to have pre-drilled holes on the front face to allow for the inclusion of LED's on the PCB.

Elbag DIN Rail Modular Enclosures, 1-9 Way
Modular Enclosures for analogue & digital instrumentation. Snap-In locking between Base and Cover. Options for vented covers and side panels, coloured or transparent lids.

Made in a blend of Polycarbonate and ABS, rated UL94-V2, these modular plastic cases can accept up to 2 PCB's at different levels, so doubling the area available.

The interconnection area is vented, and can be either open or covered with the relevant housing.

Elbag Wall Mount Cases for Electronics
Cases, with Covers, having mounting brackets for wall fixing.

Suitable for housing PCB's or transformers, the cases can be used for potting of components, and have mounting brackets or a central mounting hole for secure fixing.

These wall mount cases are made in ABS and Polycarbonate.

Elbag Cases for Home Automation
Wall Plate mounting cases for light dimmers, heating and ventilation controls, and for displays.

Elbag Potting Boxes
Square and Rectangular boxes suitable for the encapsulation of electronic parts.

Elbag Power Supply Cases
A variety of Power Supply Cases suitable for all European, American and Schuko fittings.

Internally, the power supply cases are fitted with 4 corner mounts to enable the fitting of PCB's, and also have 2 cable fasteners and 4 holes for mechanical fixing.

Elbag No-Mould custom cases and Housings
No need for Tooling of custom cases, as these designs are based on the cutting, bending and shaping of standard sheet plastic material.